Estimating and Cons Costs (DO NOT PLAGIARISM)

(DO NOT PLAGIARISM)

Determine the number of studs needed for a 120-foot- long wall where the studs are spaced at 16 inches on center.

Determine the number of 20-foot-long pieces of rebar needed to complete a 240-foot- long footing. The pieces are spliced with a lap of 18 inches and form a single bar running the length of the footing.

Determine the volume of a 20-foot by 15-foot by 4- foot-high concrete footing. Express your answer in cubic yards and include 5% waste.

An 8-foot-high by 50-foot-long wall is faced with 7 1/2- inch-long by 2 1/2-inch-high bricks. The mortar joints between the bricks are 1/2-inch thick. Using the area method, determine the number of bricks needed to face the wall.

How many cubic yards of concrete are required to construct a 75-foot-long by 24-inch- wide by 10-inch-thick continuous footing? Include 10% waste. Concrete must be ordered in quarter-yard increments. Determine the length of forms needed. The footing has three #4 continuous bars. The rebar is lapped 21 inches. Determine the number of 20-foot-long bars that needs to be ordered for the footing.

How many cubic yards of concrete are required to construct 5 each 24-inch by 12-inch by 8-foot-high concrete columns? Include 5% waste. Concrete must be ordered in quarter- yard increments. Determine the square footage of forms needed.

Set up Excel Quick Tip 5-1 (Spread Footing)

Set up Excel Quick Tip 5-2 (Rectangular Column) in excel

(DO NOT PLAGIARISM)The post Estimating and Cons Costs (DO NOT PLAGIARISM) first appeared on Submit Your Essays.Estimating and Cons Costs (DO NOT PLAGIARISM) was first posted on October 20, 2020 at 11:43 pm.©2019 "Submit Your Assignment". Use of this feed is for personal non-commercial use only. If you are not reading this article in your feed reader, then the site is guilty of copyright infringement. Please contact me at support@essaysresearch.org